Six Notes For Charcoal Briquetting Machine Production Line

Process Of Charcoal Briquetting Machine Production Line

A complete charcoal briquetting machine production line mainly includes chipping, crushing, sifting, drying, conveying and packing. Thus a series of auxiliary equipment is needed, such as wood chipper, crusher, screener, dryer, conveyor and packager.

6 Factors You Should Notice To Produce High Quality Briquettes

1.Raw Material Type
Lignin content of wood and agro wastes plays the role of adhesive in the process of whole charcoal powder briquette machine production line. It helps to bind the biomass pieces or powder together coherently under high pressure and high temperature. As different materials have different composition and characteristics, they have different performances in the briquetting process.

2.Crushing and Screening
Crushing and purifying are needed before feeding the materials into a shisha charcoal making machine. Because the feedstock with improper size and unwanted impurities will affect the briquetting result and damage your equipment.

3.Moisture Content
Ensure the moisture content is around 10%-12% before entering coal briquetting plant, so that the dryer is needed to meet this requirement.

4. Appropriate Feeding Speed

5.Compression Ratio
Coal briquette machine is designed with different compression ratio to adapt different raw materials. Therefore, when choosing a manufacturer, check if it can be customized to meet the requirements of different raw materials.

6.Temperature
Generally, there is a heating coil equipped on the briquette machine. Ensure to start the heater before run the equipment. So that there is sufficient heat produced during the pressing process to melt the lignin in the biomass feedstock.